Documentation/Modules/BoundHandler: Unterschied zwischen den Versionen
Dirk (Diskussion | Beiträge) (→Properties) |
Dirk (Diskussion | Beiträge) (→Module Description) |
||
| Zeile 63: | Zeile 63: | ||
==Module Description== | ==Module Description== | ||
| − | + | The optimization algorithm proposes one or several new solutions '''x'''. Some values of '''x''' might be outside the lower bounds x<sub>l</sub> and upper bounds x<sub>u</sub>, specified in the "Problem" module. These variables are corrected to values within the bounds by thress different methods: | |
| + | |||
| + | 0. no bound handling | ||
| + | |||
| + | This option turns off the bound handling. | ||
1. set to bounds | 1. set to bounds | ||
| Zeile 78: | Zeile 82: | ||
minus infinity, it is set to the upper bound. | minus infinity, it is set to the upper bound. | ||
| − | if x < x<sub>l</sub>, then x = x<sub>u</sub> + (x<sub>l</sub>- x<sub>u</sub>) / (x - x<sub>u</sub>) | + | if x < x<sub>l</sub>, then x = x<sub>u</sub> + (x<sub>l</sub>- x<sub>u</sub>)^2 / (x - x<sub>u</sub>) |
| − | else if x > x<sub>u</sub>, then x = x<sub>l</sub> + (x<sub>u</sub>- x<sub>l</sub>) / (x | + | else if x > x<sub>u</sub>, then x = x<sub>l</sub> + (x<sub>u</sub>- x<sub>l</sub>)^2 / (x - x<sub>l</sub>) |
==Usage== | ==Usage== | ||
Version vom 25. Oktober 2015, 12:25 Uhr
Inhaltsverzeichnis
Summary
Some optimizations require bounds on the design variables xxx. E.g. for the diameter of any mechanical support must be above a certain minimum value.
As not all optimization algorithms include bound handling, the module BoundHandler was created.
Properties
General
| Algorithm | deterministic |
|---|---|
| Design Variables | continuous variables, discrete or mixed variables are possible. |
| Objectives | any number |
| Constraints | any number |
| Boundaries | Design variables values outside the boundaries are corrected |
| Initial Search Region | not affected |
| Typical X | not affected |
| Initialization | not required |
Connections
| Starting at his module | One connection of type optimization
|
|---|---|
| Ending at this module | One connection of type optimization
|
Actions
| Name | Description |
|---|---|
| - | - |
Options
The options are currently described as "pop-up help".
Module Description
The optimization algorithm proposes one or several new solutions x. Some values of x might be outside the lower bounds xl and upper bounds xu, specified in the "Problem" module. These variables are corrected to values within the bounds by thress different methods:
0. no bound handling
This option turns off the bound handling.
1. set to bounds
If one of the variables x is below or above the bounds, it is set to the bound value, i.e.
if x < xl, then x = xl else if x > xu, then x = xu
2. reflect
If one of the variables x is below or above the bounds, it is reflected from the bound. The reflection is done such that if x goes to infinity, x is equal to the lower bound and if x goes to minus infinity, it is set to the upper bound.
if x < xl, then x = xu + (xl- xu)^2 / (x - xu)
else if x > xu, then x = xl + (xu- xl)^2 / (x - xl)
Usage
-
Source Code
ToDo:Link to SVN
References
-
